|
|
Temperature Controller Fuzzy LogicDisplays: Dual 4-digit LED Upper 0.4" ( 10 mm ) Lower 0.31”(8mm) Input:- Universal PT100 ,thermocouple, mv Output:- Rs232,RS485,Relay, 4-20mA,
0-10v,SSR Power:- Universal 90V –250VAC Enclosure: 48x48x116 |
|
Temperature ControllerDisplays:- Dual 4-digit LED Input:- Thermocouple
K E J S Output:- 2A Relay NO/NC Power:- 230VAC Enclosure:- 48x48x90
|
|
3301 Hygro-Thermometer Digital
display shows Humidity Temperature, Memory for Highest / Lowest Temp. and
Humidity, Measuring Range - Temp : -15°C~50°C, Humidity : 25%RH~95%RH, 2-Button
Operation for MAX / MIN and RESET, Features for wall hanging and table top
standing purposes. |
|
|
3302 Hygro-Thermometer Same
as above with CLOCK. 4-Button Operation for MAX / MIN, RESET, HOUR and
Minute. |
|
IT-202 Hygrometer & Thermometer With Clock Same
as above with CLOCK. 4-Button . |
|
Torque SensorCapacity:- 20 to 500Nm Output:- 1.5mV – 2.0mV per volt Accuracy:- +/-0.5%
FS Safe Load:- 120%
FS Dir:- Clockwise / Anticlockwise |
|
Torque Tester
Capacity:- 50Nm to 500 Nm Accuracy:- +/-0.5% FS Testing mode:- Clockwise / Anticlockwise Unit:- 5 nos selectable unit of measurement Function:- Peak hold, Peak track, Zero etc |
|
Torque WrenchCapacity:- 3- 55Nm to 500Nm Accuracy:- +/-0.5% FS Display:- 4 digit LCD Drive:- 3/8” , ½” , ¾” Unit:- 3 measuring unit Power:- 9VDC PP3 Alkaline |
|
|
Compression/Tension Loadcell Capacity:- 20kg to 10t Non-linearity : 0.03% Hysterisis : 0.03 % Type:- Based on Bonded Strain Gauge |
|
Tablet TesterCapacity: 100N to 1000N Accuracy: 0.25%, 0.5%, 1% Tablet size: 2mm to 35mm Unit: 6 unit. N, KN, Kg, lbs, oz, SC Output: RS232
optional. Memory: 10 sample data |
|
HATCO CM-8820 COATING THICKNESS METER(F Type = Non Magnetic Coating on Magnetic
Material). • For measuring the thickness of paint,
plastic, porcelain enamel, copper, zinc, aluminum, chrome, etc. on magnetic
bases (iron, nickel, etc.), like plating layer, lacquer layer, porcelain
enamel layer, phosphide layer, copper. Aluminum & some aly tile, paper,
etc. • Microcomputer based, no damage to the coating surface. • Wide
measuring range and high resolution. Technical Specification: Display : 4 digits,
10mm LCD. Thickness range: 0~2000um. |
|
HATCO CM-8823 COATING THICKNESS METER(NF Type = Non Magnetic Coating on Non
Magnetic Material). • For measuring the thickness of anodizing, varnish,
paint, enamel, plastic coatings, powder etc. applied to aluminum, brass,
non-magnetic stainless steel etc. • Microcomputer LSI circuit and crystal
time base to offer high accuracy measurement and fast measuring time. • Wide
measuring range and high resolution. Technical Specification : 4 digits, 10mm LCD
Display. Thickness range : 0 ~ 1000um / 0 ~ 40mil. Resolution : 0.1um (0 ~ 99.9um). Accuracy: +1 ~ 3% or
2.5um (whichever is greater). Sensor type: magnetic. Battery : 1.5V x 4, AA
size. |
|
|
HATCO TM-8810 THICKNESS METER. • Microcomputer based for high accuracy and
fast measurement of the thickness of steel, cast iron, aluminum, red copper,
brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast
iron and many other materials. • With high power of emission and broad band
of receiving sensitivity, it can match probes of different frequencies,
easily measure the rough surface, even cast iron. • Wide range, high
resolution. • Display in mm and ft switch able. Technical Specification : Display : 4 digits,
10mm LCD. Thickness range : 1.5 ~ 200mm (#45 steel), |
|
|
HATCO TM-8811 THICKNESS METER. All same as above with Sound Velocity :
2000~8000m/s. |
|
|
BOSSTEK DT-2235B CONTACT TYPE TACHOMETERS WITH LINE
SPEED ADAPTER Measuring
Ranges : 5-19,999RPM, 0.05-1,999.9 m/min (0.2-6,560 ft/min). Resolution
: 0.1 RPM (<1000 RPM), 1.0 RPM (>1000 RPM). Accuracy : +0.05%
+ 1 dgt. |
|
|
BOSSTEK DT-2238A PHOTO TECHOMETER BOSSTEK make 5
Digit, 10mm LCD Display. Range : 2.5-99999 RPM. Resolution : 0.1RPM
(<1000RPM), 1.0RPM
(>1000RPM). Accuracy : +0.05% of rdg +1dgt. Sampling Time : 1Sec. Detecting
Distance : 12 to 40 inch. |
|