AM-4201 ANEMOMETER

 

3½ digit LCD display (8mm) Portable, Fast High Accurate Readability Measurement Range : 0.4-30.0 m/s, 1.4-108 Km/h, 80-5910 f /min, 0.8-58.3Knots with Data hold function.

 

 

 

AM-4202 ANEMOMETER

Same As Above but Temperature Range: 0oC~60oC / 32oF~140oF. Resolution: 0.1oC / oF.
Accuracy: 0.8oC / 1.5oF. (Optional SPARE FAN (VANE) for Anemometer AM-4201 / AM-4202).

 

 

AM-4206 ANEMOMETER with AIR VELOCITY / AIR FLOW and Data Output RS-232 Serial Interface.

Air Velocity:

m/s  0.4 – 25.00 m/s x 0.01 m/s  Accu. +/-(2%+0.2m/s)

Mile/h 0.9 – 55.9 mile/h x 0.1mile/h  Accu. +/-(2%+0.2mile/h)

Ft/min 80 – 4921 ft/min x 1 ft/min  Accu. +/-(2%+0.2ft/min)

Km/h  1.4 – 90.0km/h x 0.1km/h Accu. +/-(2%+0.2km/h)

Knots 0.8 – 48.6 knots x 0.1 knots Accu. +/-(2%+0.2knots)

Air Flow:

CMM(m3/min) 0 – 999.900 m3/min x 0.001 –100 Area 0.001 – 9,999 m3/min

CFM (ft3/min) 0 – 999.900 ft3/min x 0.001- 100 Area 0.001 – 9,999 ft3/min

Temperature:

0 – 50 deg C x 0.1 deg C Accu. 0.8 deg C

30 – 122 deg F x 0.1 deg F Accu. 1.5 deg F.

AM-4206M ANEMOMETER with AIR VELOCITY / AIR FLOW and Data Output RS-232 Serial Interface.

 

All same as AM-4206 but with Metal Vane Probe, Heavy Duty.

 

YK-80AM METAL VANE ANEMOMETER.

 

Microprocessor circuit assures maximum possible accuracy, provides special functions and features. Large LCD with Dual function meter’s display. Metal vane, heavy duty and wide range air flow measurement. Records Maximum and Minimum reading with RECALL. Data Hold. Auto Power OFF. RS-232 Serial Interface.

 

ROAD Test Alcohol Breath Tester.

 

Unique 4 digits LCD display • Build in DSP microprocessor technology.

• Warm up time : less than 20 sec. (typical). • Auto adjust / reset, with reset button

• Illumination button for use in dark (Auto shut off after 10 seconds)

• Power source : 1.5V Alkaline (“AA” size) x 3. and 12 VDC adapter.

• Accuracy : 15% @ 0.01 % BAC • Blowing time : 4 ~ 5 sec. continuously.

• Automatic switch off after 30 sec. • Removable mouthpiece, easy to clean and replace. CE approved.

ABT-168 Alcohol Breath Tester with RS-232 Printer.

 

• Sensor : sintered metal • Warm up time: less then 1 min. (typical)

• Measuring range : 0.000~1.000mg/l BAC (or 0.000~0.200% BAC or 0.000~2.000).

• Recycle time : 30 seconds (typical)

• Power supply : 4* 1.5V” AAA” batteries, 12V AC/DC adaptor (Battery and adaptor not incursive)

• Back light • Display : photo dot matrix LCD • Accuracy : +1/-1 digit

• Mouth-piece : individually wrapped disposable w/moisture trap

• Temperature range : 0°C ~ 45°C.

AT 198 ALCOHOL TESTER.

 

• Advanced NM Hot-wire alcohol sensor. • Quick response, excellent Accuracy. • Smart MCU control.
• Direct Testing process guide. • No touch health design. • Visible and audio warning beyond pre-set limit.
• Low battery indication.

Technical Data : Detection Range : 0.001-1.00mg / L(0.000~0.20%BAC).

Accuracy : +5% at 0.22mg / L(0.05%BAC).

Warm-up Time : <10 sec. (Initial Warm-up : 30 sec).

Testing Time : < 8 sec.

Display : 3 Digit LCD.

Power : 3VDC (2 x AAA batteries).

Analytical Balance

Capacity: 60gm to 2.1kg

Least count:- 1mg/10mg

Display:- Bright FIP display

Unit:- 11 nos weighing unit

Proven Magnetic Force based Technology

Wind Shield for Stable Reading

Rugged Steel Platform

Counting Function

 External Battery Back Up uninterrupted operation

More detail